Nanoskopie

Low-temperature fabrication of nanodiamond films on untreated silicon substrates, which are preferred substrates and widely employed in industry, can extend nanodiamond film applications, for instance in biosensing and miniaturization technologies. For its realization, the weak adhesion of nanodiamond films on silicon substrates due to insufficient atomic interdiffusion at the interfaces is a serious issue that needs to be overcome. In the present study, coaxial arc plasma deposition (CAPD) grown nanodiamond films were fabricated at low temperatures on silicon substrates. The effects of the substrate temperature, which is an important parameter in the CAPD nanodiamond film growth process, were structurally and physically investigated. It was found that the films softened with increasing substrate temperature and atomic interdiffusions at interfaces between the films and substrates were activated, which resulted in the formation of SiC at the interfaces. On the other hand, the films fabricated directly on silicon at room temperature were exfoliated due to the poor adhesion and high residual stress. Consequently, intermediate layers that were fabricated at elevated substrate temperatures were employed to improve the adhesion strength of nanodiamond films on silicon substrates. This way, the atomic interdiffusion at the interfaces could be promoted and the residual stress in the films was relieved. In the second stage, the films were fabricated on the intermediate layers at different temperatures. It has shown that the top layer films fabricated at low temperature gained distinctive mechanical and structural properties. By applying this strategy, several micrometres of hard nanodiamond films can be fabricated on Si substrates without easily being peeled off.